Painters, applicators, architects and specifiers: find here the product chain to apply for each type of substrate, all our technical data sheets and direct support.
Describe your substrate: you get the full system to apply, coat by coat, with the finish you chose and the matching product data sheets.
All work must be carried out on a dry and perfectly clean substrate.
Answer the questions above: the full system appears here, from surface preparation to topcoat.
New masonry or concrete, never painted, dry and dust-free.
Priming of the substrate.
On a flat, sound substrate. If the substrate is not flat, first apply 1 coat of ENDUIT FAÇADE 100 (ENDUIT FACADE LISSE), then 1 coat of PRISMA PATE or PRISMA PRET.
Undercoat applied before the topcoat.
Concrete or masonry already covered with an old paint film.
Remove every flaking or chalking area.
Consolidating sealer.
New plaster, dry and dust-free.
Priming of the substrate.
Ready-mixed filler, suited to plaster.
Undercoat applied before the topcoat.
Existing wall tiles, kept in place, degreased and dry.
Fills the joints and removes the relief of the tiles.
Undercoat applied before the topcoat.
New façade or masonry, never painted, dry throughout.
Priming of the substrate.
Levelling then smoothing of the façade.
Undercoat applied before the topcoat.
Façade already covered with an old paint film.
Remove every flaking or chalking area.
Consolidating sealer.
Levelling then smoothing of the façade.
Undercoat applied before the topcoat.
New masonry or plaster, sound and dry, never painted. The surface must be brushed and dusted before any application.
Universal transparent primer: waterproofs and protects new masonry or plaster.
High-build powder filler to smooth cement surfaces. On plaster, prefer ready-mixed PRISMA PATE.
Blocks pores and ensures the topcoat bonds to the filler.
Smooth matt topcoat with very low odour, machine-tintable. PRISMA VINYL or PRISMA PLAST are equally suitable.
Previously painted surface, chalky or friable plaster, marked by unevenness and old patch repairs.
Binds, hardens and consolidates chalky or friable plaster. Essential before any filler on a powdery surface.
For live cracks subject to micro-movement only: flexible acrylic filling.
Ready-mixed filler for fine work: fills unevenness and leaves a smooth surface.
Evens out the absorbency of the renovated surface before the topcoat.
Excellent coverage-to-price ratio on large renovated areas. Machine-tintable.
Application of the effect ranges (pearlescent, metallic, marbled, tadelakt, polished concrete). The bonding undercoat determines the final result.
An even, non-absorbent base is the prerequisite for a uniform effect.
Grained or micro-sanded undercoat, essential for the mechanical application of decorative effect coatings.
Tadelakt effect. Depending on the desired result: CHROMIA (velvet pearl), ONYX (marbled), IRIDIUM (soft-touch pearl), VEGA STAR, FLUORINA, CIRA MINERALIA or BÉTON CIRÉ.
Bathroom, kitchen, cellar, basement or laundry room. The source of the leak must be dealt with BEFORE any painting.
Removes and disinfects mould and lichen. Allow to act, then rinse before continuing.
Waterproofing paint that actively blocks damp. The surface must be free of residual moisture.
Highly washable smooth matt topcoat for areas sensitive to bacterial contamination.
Repainting a tiled wall without removal: the joints must be concealed and adhesion secured on a non-porous surface.
Waterproof filler that conceals interior tile joints directly.
Evens out the base before the topcoat.
In wet rooms, prefer the HYGIÈNE topcoat, which is more washable.
Doors, skirtings, joinery. The wood must be finely sanded and meticulously dusted.
Universal water-based primer, also designed to protect wood surfaces.
Fills the wood grain and, after light sanding, leaves a smooth surface ready for the topcoat.
The topcoat depends on exposure and the desired result: contact us for the recommendation suited to your project.
Floors subject to heavy traffic, abrasion and chemical attack. Mechanical surface preparation determines the durability of the whole system.
Sandblasting, shot-blasting or planing. The substrate must be dust-free, clean, sound and free of oil and grease.
PRISMA POX, solvent-free and odourless two-component epoxy/polyamine: chemical, wear, impact and abrasion resistance.
Sound masonry façade with no live cracks. The surface must be cleaned and major cracks filled beforehand.
Strong porosity-regulating power. Apply in a single thin coat, avoiding runs and excess thickness.
High-build cement render, up to 5 mm per coat. For façades requiring thickness build-up only.
Levelling filler that perfectly evens out rough façades before the topcoat.
Water-based matt acrylic topcoat. PRISMA VINYL façade is the economical alternative.
Façade prone to mechanical cracking or water ingress. Treat the source of the leak and remove residual moisture before painting.
Surfacing mortar reinforced with glass micro-fibres: prevents mechanical cracking from returning.
Regulates porosity and secures adhesion of the waterproofing system.
High elasticity: bridges live façade cracks and follows their movement.
Accessible or non-accessible terraces, roofs exposed to solar radiation. The surface must be sound and dry.
Liquid elastic resin forming a continuous, impermeable rubber-like membrane.
Blocks infrared solar radiation and lowers the temperature beneath the roof.
These systems are general recommendations based on our technical data sheets. For a specific project — unusual substrate, severe exposure, tight schedule — consult our technical department before application.
Every technical data sheet in the catalogue, available for direct download.
32 technical data sheets
Our team supports professionals from specification through to project handover.
System recommendation, substrate diagnosis, consumption calculation: speak directly to a technician.
+212535451117Join the Prisma Color network: reseller terms, tinting machine and commercial support.
Contact us